Your machine is compatible with ResMed's F20 and N20 series masks
and with the AirFit P10 for AirMini.
Make sure all parts and accessories
used with the machine are compatible. For compatibility information,
refer to www.resmed.com for more information.
Your AirMini machine is designed to work with ResMed's AirMini app.
However, the AirMini app is not essential to operate the machine. For
more information on the AirMini app, refer to Using your machine with
the AirMini app or the AirMini app Patient eHelp.
HumidX and HumidX Plus
The HumidX and HumidX Plus are waterless humidifiers. These are
designed to provide more comfort by improving the moisture level in
the air you breathe and offering relief from possible dryness.
The HumidX is a good starting point for finding the right level of
humidification. The HumidX Plus will improve the humidity level further
and is useful when the ambient humidity level is very low (eg, high
altitudes, on an aircraft).
The HumidX and HumidX Plus can be used with
the N20 connector for
AirMini and AirFit P10 for AirMini only.
The HumidX and HumidX Plus must be replaced within 30 days of
opening the HumidX/HumidX Plus pack.
|Operating pressure range||AutoSet, AutoSet For Her, CPAP, 4 to 20 cm H2O|
|Aircraft use||ResMed confirms that the machine meets the Federal Aviation Administration (FAA) requirements (RTCA/DO-160, section 21, category M) for all phases of air travel.|
|Dimensions||5.4" (W) x 3.3" (D) x 2.1"(H)136 mm (W) x 84 mm (D) x 52 mm (H)|